Bathtub Installation Cost by Type and Material in 2026


$1,388 – $2,443That is the national average bathtub installation cost per tub in Homewyse’s May 2026 estimate. This Old House puts the average at $2,100 including removal, and Costonce, a smaller cost site that does not explain its method, gives $1,200 to $2,500 for a standard alcove tub replacement. The guides do not agree on everything: Fixr reports a $6,000 average and a $2,000 to $10,500 typical range across all tub types.

Most of the spread comes from what you are installing. A basic alcove tub that goes back into the same three walls is a half-day job. A freestanding or clawfoot tub usually means new plumbing, a new floor finish and a heavier load on the floor. This Old House says a simple replacement with no plumbing changes and no surround can take as little as six hours, while complex installations can take a week or more. The tables below set the published figures side by side. For walk-in tubs, which are a different product, see our guide to walk-in tub cost.

Bright bathroom with a white acrylic alcove bathtub, a tiled surround and a chrome faucet

Bathtub installation cost by tub type

Tub typeFixr (installed)Costonce (installed)This Old House (tub only)
Alcove$450 – $1,400$1,200 – $2,500$200 – $800 (all-purpose tub)
Alcove tub and shower combo$950 – $2,400——
Drop-in$900 – $5,000$2,000 – $4,000—
Corner$1,400 – $8,000——
Freestanding or clawfoot$1,200 – $10,000$3,500 – $6,000+ (freestanding soaking tub with new plumbing)$2,500 – $10,000 (freestanding)
Jetted (whirlpool or air bath)$7,000 – $15,000—$2,400 – $5,600
Fixr and Costonce columns are installed prices; the This Old House column is the price of the tub alone. Sources: Fixr, updated August 29, 2025; Costonce, prices updated March 2026; This Old House, updated March 5, 2026.

Fixr and Costonce disagree on the alcove tub: Fixr’s $450 to $1,400 sits below Costonce’s $1,200 to $2,500, though Costonce says its figure includes removing the old tub. Fixr’s overall $6,000 average is also far above its own alcove range, because its average covers every type, from a prefabricated 5-foot acrylic alcove tub (its cheapest case at about $800) to a stone soaking tub (its dearest, about $22,000 to $24,000). If you are replacing a standard tub, the lower figures are the better guide; this is our reading, as the guides do not explain the gap.

Estimate your bathtub installation cost

Estimate your bathtub installation cost

Estimated range$1,200 – $2,500

Our estimate: the published ranges above multiplied out for your inputs. Not a quote. Alcove, drop-in and freestanding ranges from Costonce (March 2026); combo and corner from Fixr (August 2025); removal and permit from This Old House (March 2026); surround from This Old House; moving lines from Costonce. Costonce prices already include removing the old tub. Floor reinforcement is not included. State adjustment: BLS construction wages (May 2025), applied to an assumed 50% labor share. How we calculate

Tub type (installed price per tub): published range per unit
Alcove tub, standard replacement$1,200–$2,500
Alcove tub and shower combo$950–$2,400
Drop-in tub$2,000–$4,000
Corner tub$1,400–$8,000
Freestanding tub with new plumbing$3,500–$6,000

Bathtub cost by material

MaterialThis Old House (tub only)Costonce (tub only)Fixr (average installed)
Fiberglass$200 – $800$300 – $700$6,500
Acrylic$300 – $1,000$500 – $1,500$6,000
Steel (enameled)$200 – $1,200—$4,800
Cast iron$900 – $5,000$1,500 – $4,000+$5,000
Sources: This Old House, March 5, 2026; Costonce, March 2026; Fixr, August 29, 2025.

Read the Fixr column with care. Its averages are for whole projects, and they do not rise with the price of the tub itself: fiberglass averages the most and cast iron less. Fixr does not say why. The tub-only columns are the better guide to material. Fiberglass and acrylic are the cheapest and lightest, while cast iron costs more and is heavy to carry, remove and support. For the same reason, This Old House notes that heavy tubs can call for floor reinforcement.

Removal, surround, plumbing and floor work

ItemThis Old HouseFixrCostonceBob Vila (older, Mar 2023)
Removing the old tub$200 – $1,200$200 – $1,200Included in installation$50 – $100
Tub surround$1,100 – $2,100 (professionally installed)Acrylic $600 – $1,400; fiberglass $800 – $2,400; tile $400 – $12,000Acrylic adds $300 – $800; tile adds $800 – $3,000$500 – $2,000
Moving drain or supply lines—Alcove to shower combo adds $200 – $500Adds $500 – $2,000$400 – $1,900
Floor reinforcementNo figure given$2,000 or more for a filled tub—$300 – $800
Installation labor$100 – $2,00020% – 50% of the total, averaging $1,200 – $3,000Plumber $500 – $1,500$100 – $2,000
Sources: This Old House, March 5, 2026; Fixr, August 29, 2025; Costonce, March 2026; Bob Vila, updated March 23, 2023 (older).

Floor reinforcement is the line where the guides differ most: Fixr says $2,000 or more, while the older Bob Vila article says $300 to $800. We could not find a 2025 or 2026 source that settles it, so have a contractor look at the floor framing before you accept a number. Costonce says keeping the tub in the same place saves $500 to $1,500 compared with relocating the plumbing.

Fixtures are often left out of the first quote. This Old House lists average prices of $249 for a faucet and $82 for a spout. Fixr puts a faucet at about $300 on average, from $100 for a deck-mounted model to $500 or more for a high-end floor-mounted one.

Freestanding white bathtub with a floor-mounted chrome faucet on a tiled bathroom floor

Freestanding and clawfoot tubs

A freestanding tub is cheaper to buy than to install. If the old tub sat in an alcove, Fixr says the work of removing the surround, laying new tile and new flooring adds $800 to $3,000, which it says can add up to 50% to the installation cost. Fixr also lists the freestanding or clawfoot range as $1,200 to $10,000 installed, and Costonce gives $3,500 to $6,000 or more for a freestanding soaking tub with new plumbing.

Clawfoot tubs need exposed fixtures. An older Inch Calculator guide (updated July 19, 2023) puts clawfoot fixtures and hardware at $500 to $1,000 and installation labor at $700 to $900 where plumbing is already in place (Inch Calculator, older). Treat those as a rough guide only.

Labor, permits and doing it yourself

This Old House gives a licensed plumber’s rate as $45 to $200 an hour and permits for major plumbing work as $50 to $500. Fixr says a typical replacement takes 6 to 8 hours, and 9 to 12 hours when there is water damage, mold or new plumbing under the floor. If a new tub forces you to upgrade the water heater, Fixr puts that at $1,000 to $4,000; see our guide to water heater replacement cost.

This Old House says doing it yourself can suit a same-size swap with existing plumbing, no water or structural damage, and some plumbing or carpentry experience. It advises leaving drain changes, water supply changes and waterproofing to a licensed professional. In its 2026 survey of 1,000 homeowners, about 30% of homeowners reported unexpected plumbing upgrades, 26% found water damage and about 38% said the project cost more than expected. Budget a cushion for what the old tub was hiding.

Tub, shower or full remodel

If your tub is being replaced along with the tile, vanity and floor, price the whole room instead: our bathroom remodel cost guide covers that. If a family member needs a tub with a door, read walk-in tub cost, where This Old House lists walk-in tubs at $2,000 to $12,000 for the tub alone. If a shower would serve you better than a tub, compare it with a walk-in shower.

How to keep the bill down

  • Keep the tub where it is. Costonce says leaving the drain and supply lines in place saves $500 to $1,500.
  • Choose acrylic or fiberglass over cast iron. They are cheaper to buy, and cast iron is heavier to move and support.
  • Use a prefabricated surround. Fixr lists acrylic surrounds at $600 to $1,400, against up to $12,000 for tile.
  • Ask what the quote includes. Costonce counts removal of the old tub in the installation price, while This Old House and Fixr list removal separately.
  • Get at least three written quotes for the same scope and compare them line by line.

Questions to ask before you sign

  • Does the price include the tub, drain, faucet, surround and removal of the old tub?
  • Will you check the subfloor and framing, and what happens if you find rot or water damage?
  • Does the quote include moving drain or supply lines, and who pulls the permit?
  • How much does the tub weigh when full, and does the floor need reinforcement?
  • Are you licensed and insured, and is the work warrantied in writing?

For more on vetting a plumber or remodeler, read how to find a contractor.

Sources


These figures are cost ranges compiled from published pricing and regional labor rates. They are estimates, not quotes. What you pay depends on your home, your region and who you hire.