Hydro Jetting Cost in 2026: Kitchen Drains, Main Sewer Lines and Add-Ons


$200 – $1,000That is the range the cost guides give in 2026 for hydro jetting a house drain or main sewer line. Yelp puts the national average at $200 to $550, with extremely clogged pipes reaching $1,000. Fixr lists hydro jetting a main sewer line at $350 to $600, and a plumber’s cost guide from CPI Service gives $350 to $1,100 for the main line. A camera inspection, a missing cleanout or a damaged pipe can add hundreds more.

Hydro jetting is drain cleaning with a high-pressure water hose instead of a metal cable. It costs more than snaking, and the price depends mostly on which line is being cleaned, how far the plumber has to reach, and whether there is a cleanout to feed the hose through. This guide stays on jetting itself. For the other ways to clear a clog, DIY tools and after-hours rates, see our guide to drain cleaning cost.

High-pressure jetting hose coiled beside an open floor cleanout in a clean basement utility area

Hydro jetting cost by line

LineYelpFixrCPI Service (plumber)
Kitchen drain—$300 – $500$300 – $800
Bathroom drain——$250 – $550
Branch drain line——$300 – $700
Main sewer line$200 – $550; up to $1,000 for extremely clogged pipes$350 – $600 (mid-size clog); $250 – $1,000 (sewer line cleaning)$350 – $1,100; most common residential $500 – $800
Sources: Yelp, last updated October 2026; Fixr, kitchen sink (August 29, 2025), main sewer line and sewer line cleaning (both January 31, 2025); CPI Service, July 9, 2026. CPI Service is a plumbing company, so its figures come from a business that sells the service. A dash means the source gives no figure.

The main line is where the guides spread out. Yelp’s whole range sits below CPI Service’s, and Fixr’s own two pages disagree: $350 to $600 on its main-line page, $250 to $1,000 on its sewer-cleaning page, where the top figure is hydro jetting a full main-line blockage. Yelp also quotes one California plumber who charges a flat $500 for a kitchen or bathroom sink and $1,000 for a sewer or toilet, a reminder that local rates can sit well above a national average.

Labor drives most of the bill. Fixr gives plumbers $75 to $150 an hour and puts labor for a basic main-line clog of one to two hours at $75 to $300 (Fixr); CPI Service says $100 to $250 an hour. For context, the Bureau of Labor Statistics reports a median of $30.67 an hour for plumbers in May 2025 (BLS). That is what a plumber is paid, not what a company bills you; the rate also covers the truck, the jetting machine, insurance and overhead.

Estimate your hydro jetting cost

Estimate your hydro jetting cost

Estimated range$300 – $800

Our estimate: the published ranges above multiplied out for your inputs. Not a quote. Ranges from Yelp (October 2026), Fixr (2025) and CPI Service, a plumbing company (July 2026): the lowest and highest figure the sources give for each line. Add-ons come from Fixr, CPI Service and Yelp and overlap, so do not assume every box applies to your job. State adjustment: BLS construction wages (May 2025), applied to an assumed 50% labor share. How we calculate

Which line: published range per unit
Kitchen drain$300–$800
Bathroom drain$250–$550
Branch drain line$300–$700

Our estimate: a main sewer line jetted with a camera inspection and no cleanout would run about $450 to $2,250 if you add the lowest and highest figures above ($200 + $100 + $150, and $1,100 + $800 + $350). This is our own addition of figures from different sources, not a measured price, and most jobs will not need every extra.

Hydro jetting vs snaking

LineSnakingHydro jetting
Main sewer line (Fixr, mid-size clog)$100 – $500$350 – $600
Main line, snaking or rodding vs jetting (Fixr)$150 – $375$250 – $1,000
Kitchen sink (Fixr)$100 – $300$300 – $500
Sources: Fixr, main sewer line and sewer line cleaning, both January 31, 2025; Fixr, kitchen sink, August 29, 2025. Fixr also lists rodding, which can break up roots, at $150 to $600 on the main line.

Snaking opens a hole through the blockage. Fixr says it is the cheapest common method and works for small to mid-size clogs, but it “won’t detect the cause of the clog or any underlying problems.” Jetting costs more because of the equipment, and Fixr says it clears away more debris and residue than other methods (Fixr). CPI Service describes snaking as a temporary opening and jetting as scouring the whole inside of the pipe, and it recommends jetting for heavy sludge, recurring roots and severe grease in a line that is structurally sound (CPI Service).

In practice that points to a simple rule, which is our reading and not a quoted standard: for a single slow sink with no history, snaking is usually enough; if the same line has clogged again after snaking, or the cause is grease or roots, ask for a jetting quote next to the snaking one. Fixr suggests cleaning a main sewer line every 18 to 22 months in homes under 40 years old, and more often in older ones (Fixr).

Inspection camera head on a flexible cable lying next to an open sewer cleanout pipe

Camera inspection, cleanout and other add-ons

ItemYelpFixrCPI Service (plumber)
Camera inspection—$100 – $800, up to $1,500 for the whole systemNo price; some companies include it, others bill it separately
No accessible cleanout$800 – $1,500 to cut the pipe and install one$600 – $2,000 (main-line page); $1,000 – $3,500 (sewer cleaning page) to installAdds $150 – $350 to the jetting bill
Tree roots—$100 – $600 to remove ($100 – $800 in its problem table)Adds $250 – $800
Older or corroded pipe——Adds $150 – $400
Long line——Adds $100 – $500
After-hours sewage backupAdds $100 – $150—Adds 50% – 150%
Sources: Yelp, October 2026; Fixr, main sewer line and sewer line cleaning, January 31, 2025; CPI Service, July 9, 2026.

The camera and the cleanout are the two to settle before the visit. Without a cleanout, CPI Service says the plumber may have to pull fixtures, work from roof vents or cut into a basement stack, which is what the surcharge pays for. If your line has no cleanout and you will need the line cleaned again, installing one is a one-time cost that every later visit benefits from. Yelp suggests asking for a discount, which it says is typically 10% when requested.

Risks for old or damaged pipes

Jetting is not safe for every pipe. Fixr says it “can damage old pipes and cause leakage” and notes that older systems built with clay or cast iron deteriorate and eventually crack (Fixr). Its separate sewer-cleaning page calls jetting “gentler on the drains” than other methods, so the guide does not speak with one voice on this. CPI Service is more specific: it names fragile clay, crumbling Orangeburg and rusted cast iron as materials that can fail under jetting pressure, calls a camera inspection before the job mandatory, and says an older or corroded line means the plumber works slower and at lower pressure, which is where its $150 to $400 surcharge comes from (CPI Service).

Yelp’s warning is about money: on older pipes, a job of $1,000 or less could turn into a sewer line replacement of $20,000 or more (Yelp). That figure is Yelp’s upper case, not a typical bill. Fixr gives $50 to $250 per linear foot for replacing a section of sewer line, and $1,000 to $20,000 for section replacement depending on length, location and materials (Fixr; Fixr). If the camera shows a cracked, collapsed or sagging section, cleaning is no longer the right fix; see sewer line replacement cost for what repair and replacement run.

If your line is old, or has a history of roots or backups, ask the plumber to show you the camera footage before any jetting starts. That is our advice; CPI Service goes further and treats the inspection as mandatory.

How to keep the bill down

  • Ask for the camera inspection and the jetting in one quote. CPI Service says some companies include the inspection and others list it separately.
  • Know where your cleanout is before you call. A plumber who has to pull a toilet or cut into a stack charges for the extra labor.
  • Book in business hours. Yelp adds $100 to $150 for after-hours sewage backups.
  • Ask for the discount. Yelp says a 10% discount is typical when requested.
  • Keep grease and wipes out of the drain so the line does not need jetting again; see drain cleaning cost for what not to pour down a drain.

Questions to ask before you sign

  • Is the price per line or for the whole visit, and is the camera inspection included?
  • What is the pipe made of, and what pressure will you use on it?
  • Is there a cleanout, and what do you charge if there is not?
  • Will I see the video before and after the job?
  • Are you licensed, bonded and insured, and is the work guaranteed if the clog returns?

If other plumbing work is due at the same visit, see our guide to water heater replacement cost. For more on vetting a plumber, read how to find a contractor.

Sources


These figures are cost ranges compiled from published pricing and regional labor rates. They are estimates, not quotes. What you pay depends on your home, your region and who you hire.